Adjustable support clamp 30 MM
Produced in galvanised steel 2.0 mm thick, this clamp is for connections between the ridge/corner and the roofing structure. The structure formed by the clamp + batten assembly will be responsible for the reaction of the roof ridges and corners to gravity and to the wind. Thanks to the varied borings and the large length of the support pincers (210 mm), the part is able to cope with the height of any construction solution. Its 30x30 mm base has been designed to thoroughly and effectively attach a support batten of the same section. It has holes on each side of the base for clamping the batten. It also has a 45 mm thread variation for final level adjustments.

Material

Galvanised steel 

Special Clamp Characteristics

Width: 30 mm
Length: 210 mm
Thickness: 2mm
Unit Weight: 0,169 kg
Yield: 2 un/m
Universal support clamp
Produced in galvanised steel 2.0 mm thick, this clamp is for connections between the ridge/corner and the roofing structure. The structure formed by the clamp + batten assembly will be responsible for the reaction of the roof ridges and corners to gravity and to the wind. Thanks to the varied borings and the large length of the support pincers (210 mm), the part is able to cope with the height of any construction solution.

Material

Galvanised steel 

Special Clamp Characteristics

Width: 50 mm
Length: 210 mm
Thickness: 2mm
Unit Wieght: 0,175 kg
Yield: 2 un/m
SPECIAL TILE CLAMP
Produced in stainless steel, 1.5 mm thick and with a mechanically effective clamping principle. This piece was designed to meet the most peculiar needs of mechanical fixing of roofs. Usually used when it is not possible to fasten ceramic parts directly with screws. When the supports below the holes of the parts are not suitable for fixing, this clamp enables the parts to be fixed at a support point some distance from the fixation application point.

Material

Stainless steel

Special Clamp Characteristics

Width: 180 mm
Length: 410 mm
Height: 200 mm
Unit Weight: 0,010 kg
Thickness: 1,00 - 1,50 mm
FIXATION CLAMP FOR LUSA RIDGE
Resistant to atmospheric influences, the fixation clamp for the Lusa ridge has high resistance to form and function with a long life. The fixing clamp of the Lusa ridge is applicable in roof ridges and corners. Designed specifically for UMBELINO MONTEIRO ridge tilings. The rods of the fastening clamp of the Lusa ridge are easily foldable, allowing an easy adaptation to the "nose of the ridge tile". In addition, the holes allow quick and effective fixing on the batten.

Material

Galvanised steel 

Characteristics of the Fixation Clamp for the Lusa Ridge

Width 1: 12 mm
Width 2: 80mm
Length: 145 mm
Unit Weight: 0,016 kg
Thickness: 2 mm
FIXATION CLAMP FOR THE MARSEILLE RIDGE
Resistant to atmospheric influences, the fixation clamp for the Marseille ridge has high resistance to form and function with a long life. The fixation clamp of the Marseilles roofing is applicable on roof ridges and corners. The fixation rods of the Marseille ridge hold the Marseille ridge laterally.

Material

Galvanised steel 

Characteristics of the Fixation Clamp for the Marseille Ridge

Width: 25 mm
Length: 200 mm
Unit Weight: 0,071 kg
Thickness: 2 mm
FIXATION CLAMP FOR THE UNIVERSAL RIDGE
Resistant to atmospheric influences, the fixation clamp for the universal ridge has high resistance to form and function with a long life. The fixation clamp of the universal ridge is used in roof ridge and corner areas for all the UMBELINO MONTEIRO roof tile ranges.

Material

Lacquered Aluminium

Characteristics of the Fixation Clamp For the Universal Ridge

Width: 18 mm
Length: 110 mm
Unit Weight: 0,015 kg
Thickness: 2 mm
STEEL CLAMP AISI 304 FOR TRADITIONAL CANUDO CLAY TILE 3 MM
Produced in stainless steel with 3.0 mm thickness, this clamp aims to correctly fix all the sloping tiles, which are UM Canudo clay tiles. Its shape allows an ideal overlap of 10 cm between tiles. It guarantees the reaction to the gravitational and wind sliding of the straw canopies -traditional Canudo clay tiles- eliminating any other bonding element (masses, foams, etc.). It guarantees greater entrance and circulation of air in the roof. Due to its characteristics it is resistant to all the elements, ensuring effective fixings throughout the useful life of the roof, without rusting or corroding.

Material

Steel AISI 304

Aisi 304 Steel Clamp characteristics for traditional canudo clay tile 3 mm and Packaging

Width: 13 mm
Length: 95 mm
Unit Weight: 0.009 Kg
Thickness: 3 mm
Package: 500 units
Package Width: 15.5 cm
Package Length: 31 cm
Package Height: 13 cm
STEEL CLAMP AISI 304 FOR TRADITIONAL CANUDO CLAY TILE 2.4 MM
Produced in stainless steel 2.4 mm thick.

Material

Steel AISI 304

Aisi 304 Steel Clamp characteristics for traditional canudo clay tile 3 mm and Packaging

Width: 13 mm
Length: 95 mm
Unit Weight: 0.006 Kg
Thickness: 2.4 mm
Bag: 250 units
Package: 750 units
Package Width: 15.5 cm
Package Length: 31 cm
Package Height: 13 cm
EAVE FIXING CLAMP
The fixation clamp for the eave works along with the screw to ensure the correct fixing of the roof tiles on the eave. Whether it is the eaves composed of the tile itself or by special pieces (spouts and eyelash covers), the clamp allows you to secure the pieces effectively ensuring freedom of movement in any direction. Effective to ensure that eave parts / eaves are not "plucked" over time and by the action of wind.
Produced in lacquered zinc, the part bends easily according to the height of the ceramic part.

Material

Zinc

Aisi 304 Steel Clamp characteristics for traditional canudo clay tile 3 mm

Width: 15 mm
Length: 100 mm
Unit Weight: 0.010 Kg
Thickness: 3 mm
Yield: 5 un / m

Our Brands

Here you can get to know our brands for your project. Let yourself be inspired!